Accessories

Tire changing and service work is easier than ever with the RakJak™ pneumatic jack extended handle models. RakJak™ rolls easily to the vehicle to be lifted. Just connect an air-line and the feather control valve provides smooth, rapid lifting. The handle can be adjusted in two upright positions for storage and transport. With the handle fully lowered, you can effortlessly position the RakJak™ under the car.

The pivoting and self-aligning jack pad* is really handy for side lifting. The set includes three jack pads.

A pad that is less than an inch in height is permanently installed first and will reduce the overall collapsed height to 4 7/8 inch on the DBT2. The modified standard size DBT2 jack pad nests around the permanently installed pad. The self-aligning pad nests in the same manner. These pads are interchangeable in seconds without tools to save time and offer the flexibility of a variety of jack pad heights and styles.

The pivoting and self-aligning jack pad distributes the load evenly from end to end on its 12-inch wide platform. The pivoting action will adjust as the vehicle is being lifted. This pivoting action continuously distributes the load. Its large rubber pad protects the lifting surface and helps stabilize the load.

Please note that the pivoting jack pad is for side lifting only under the rocker panel or pinch weld and the place to be lifted under the car must stay in continuous contact with the full 12 inches of the pad. Adequate testing must be performed to insure a secure position and that no vehicle damage will occur. This jack pad should never be used on cross members, suspension parts, frame rails or any part under the car other than the rocker panel or pinch weld. *

Patent Pending wall mount brackets keep your RakJaks accessible and off the floor. Organize your shop with these handy wall mount brackets. Lags and shields for masonry mounting included.

Extension 13.75” Wt: DBT2L 39 lbs.