Long Handle for RakJak
Tire changing and service work is easier than ever with the RakJak™ pneumatic jack extended handle models. RakJak™ rolls easily to the vehicle to be lifted. Just connect an air-line and the feather control valve provides smooth, rapid lifting. The handle can be adjusted in two upright positions for storage and transport. With the handle fully lowered, you can effortlessly position the RakJak™ under the car.
Jack Pad for RakJak
The pivoting and self-aligning jack pad is really handy for side lifting.*
This innovative jack pad is used exclusively on the pinch weld on the underside of the rocker panels to effectively increase the contact area made with the jack pad. This adapter is fabricated from heavy duty plate and has a thick rubber insert that will protect the underside of the vehicle. The pivoting jack pad will automatically adjust to the angle change as the vehicle is lifted. This will always occur when lifting from a single point. The rubber pad is 12 inches long and dramatically reduces the chance of damage to the underside of the vehicle by displacing the load uniformly from end to end on the pad. The pivoting pad installs without tools on most Rak Jaks and comes with Zendex Tool’s standard two year limited warranty.
*WARNING: THIS PRODUCT MAY ONLY BE USED ON A PINCH WELD OR ROCKER PANEL AND ADEQUATE TESTING MUST BE PERFORMED TO INSURE THAT NO DAMAGE WILL OCCUR WITH ITS USE. IT CANNOT BE USED ON FRAME RAILS, CROSS MEMBERS, SUSPENSION PARTS OR ANY OTHER PLACES OTHER THAN THE PINCH WELD. CONTINUOUS CONTACT FROM END TO END ON THE RUBBER PAD MUST ALWAYS BE MAINTAINED OR LOSS OF LOAD CAN OCCUR.
Wall Mounts for RakJak
Patent Pending wall mount brackets keep your RakJaks accessible and off the floor. Organize your shop with these handy wall mount brackets. Lags and shields for masonry mounting included.